Burn ISO to USB Mac Using Terminal. You can make use of the default command line interface on. If you want to use your USB stick with an Apple Mac, you will need to restart or power-on the Mac with the USB stick inserted while the Option/alt (⌥) key is pressed. This will launch Apple’s ‘Startup Manager’ which shows bootable devices connected to the machine.

With a bootable Ubuntu USB stick, you can:

Install or upgrade Ubuntu, even on a Mac
Test out the Ubuntu desktop experience without touching your PC configuration
Boot into Ubuntu on a borrowed machine or from an internet cafe
Use tools installed by default on the USB stick to repair or fix a broken configuration

Creating a bootable USB stick is very simple, especially if you’re going to use the USB stick with a generic Windows or Linux PC. We’re going to cover the process in the next few steps.

Apple hardware considerations

There are a few additional considerations when booting the USB stick on Apple hardware. This is because Apple’s ‘Startup Manager’, summoned by holding the Option/alt (⌥) key when booting, won’t detect the USB stick without a specific partition table and layout. We’ll cover this in a later step.

It’s not particularly easy to create a bootable USB flash drive so you can try running Linux on a PowerPC Mac. It took me a couple weeks of research, asking questions of our Linux on PowerPC Macs group on Facebook, and experimenting before I could finally boot into Linux 14.04 from a thumb drive. I learned some lessons. I’m going to make it a lot easier for you to install Linux on your old PPC Macs.

Linux Download Iso Bootable

I’ve experimented with Linux and BSD Macs going back to the Mac IIci era, and I’ve never had much luck. Back in the olden days, Linux was a text-based operating system similar to MS-DOS. Everything was handled through the command line in the late 1990s. This time around I wanted to create a “live” flash drive so I could make sure it actually worked before committing to installing Linux on a hard drive.

If only I’d had a blank CD-R or DVD-R, it would have been a lot easier!

My original testbed was a Late 2005 2.3 GHz Power Mac G5 Dual with 3 GB of RAM and two hard drives, one with OS X 10.4 Tiger, the other with OS X 10.5 Leopard. It’s my most powerful PowerPC Mac, so I figured it would be a good way to take Linux for a spin.

Pick a Distro

Step one is to choose your distribution. After talking with others in our small-but-growing Linux PPC Facebook group, I settled on Lubuntu as a good starting point. Lubuntu is known for having a lighter-weight user interface, LXDE – similar to what Simon Royal used when he put LXLE on an old PC.

Ubuntu Linux has a simple numbering scheme for its versions. Version 14.04 was released in the 4th month of 2014, and 16.04 in the 4th month of 2016. That’s also the latest version available for PowerPC at present. You can download 14.04 and 16.04 from this page, earlier versions from this page, where you can also get version 12.04 for PowerPC, among many other architectures.

PowerPC distros prior to version 12.04 have separate 32-bit and 64-bit installers. The only PowerPC Macs that can use a 64-bit operating system are G5 iMacs and Power Macs. Anything before G5 can only use a 32-bit Linux. I messenger for mac free download windows 10. Starting with version 12.04 the 32-bit and 64-bit versions are part of the same package for Macs.

I suggest you start by downloading Mac (PowerPC) and IBM-PPC (POWER5) desktop CD, which is designed to be burnt to a CD-R and give you a fully bootable way to test out Linux before you commit to it. That’s fine if you have blank CD-R media or a CD-RW disc, but I haven’t burnt a CD in years and have no blanks at present.

That was also the biggest reason I had problems. Using a USB Flash Drive was an exercise in frustration.

The USB Flash Drive Problem

I do, however, have a few 8 GB and larger USB flash drives, and there are plenty of instructions online for properly formatting the flash drive and getting the bootable ISO installed. And none of them worked on my Power Mac G5. I would spend hours trying this, that, and the other thing. Formatting the flash drive was the easy part; installing the ISO and creating a bootable system stumped me.

The only method I found that worked for creating a bootable USB flash drive with Lubuntu on it required me to use Etcher, a freeware app that takes an ISO and creates a bootable flash drive from it. However, Etcher doesn’t run on PowerPC Macs. Nor does it run on my Intel Macs with OS X 10.6 Snow Leopard. I had to use one of my Macs with OS X 10.11 El Capitan installed, and that did the job.

In other words, you need a fairly modern Mac to create the bootable flash drive you need to launch Linux on PowerPC Macs.

I formatted the flash drive as FAT, exFAT, HFS+, Apple Partition Map, GUID Partition Map, and Master Boot Record. All mac os version. Etcher dutifully imaged the ISO file to the flash drive. But it wouldn’t boot.

The key is to format the flash drive using Master Boot Record and FAT. Those are not the default settings, so you’ll have to find them in your version of Disk Utility.

AlphaPlugins Digitalizer II - the new version of our famous Photoshop plug-in. It supports Audio Unit plug- ins and many formats, including wav, aiff, caf, mp3, mp4, FLAC, Ogg/Vorbis. TwistedWave is a very easy to use and powerful. Blue Cat's Remote Control is a set of plug- ins which let you control and monitor in real time several MIDI controllable plug- ins or devices from a single customizable user interface: the User Interface of your favorite DirectX or VST plugin does not. Powerpoint download free for mac os. Indeed the AlphaPlugins Digitalizer II is the fully new and power effects machine that lets you add in your composition textual effects with professional quality.

But It Won’t Boot

I’ve been a spoiled Mac user since 1986, and if I’d had a CD-R or DVD-R, this would have been easy. Start your Mac, hold down the C key, and it will boot from whatever is in your optical drive. That goes back to the first Macs with built-in CD-ROM drives. It’s easy, but there’s nothing nearly as easy for booting from a USB flash drive.

On most Macs, if you hold down the Option key (marked Opt on some Mac keyboards, Alt on Windows keyboard) at startup, your Mac will present you with all the bootable options on your computer. On my Power Mac G5, the options are OS X 10.4.11 Tiger, 10.4.11 Tiger Server, and 10.5.8 Leopard.

If I’d had an external USB or FireWire drive, it would have shown up as well. But no matter what I did, the USB thumb drive never showed up as an option. I couldn’t boot from it in the traditional way.

Open Firmware

Whatever the reason, my last generation Power Mac G5 will only boot from the flash drive if I startup in Open Firmware. Hold down Cmd, Opt, O, and F at startup and hold them down until text appears on the upper left corner of your display. Your modern Mac be in Open Firmware (OF, as in two of the keys you hold down to boot into it). OF is a low-level operating system with a command line interface, like the Apple II+ at work that was the first computer I used, the Commodore VIC-20 and 64 that I used at home because they fit my low-end budget, and that Zenith Z-151 PC running MS-DOS 3.3 circa 1987.

Launch OF. That can take a while, as OF tests all your system memory every time you launch it. Just hold those 4 keys down until OF tells you to let go of them.

As long as you only have one bootable USB device, such as the flash drive with Lubuntu or an external CD-ROM or DVD drive, you can type in the following to boot from that device on a dual-core Power Mac G5:

boot ud:,:tbxi

and then hit Return or Enter. That worked perfectly with my Late 2005 Power Mac G5, but it would not work with my older 2.0 GHz dual-processor Power Mac G5s no matter what I did, and I didn’t bother to try it on an iMac G5.

If you have more than one bootable device, type devalias at the prompt, hit Return, and you will see a lengthy list of devices like this.

That was a bit of a rabbit trail for me. In the end I found the command that let me boot from the front USB port on my older Power Mac G5 – these are all equivalent:

boot usb2/disk@1:2,yaboot
boot usb2/disk:2,yaboot
boot usb2/@1:2,yaboot

But that only worked on one o

Linux For Mac Iso